SPC Flooring Production Line: 92/188 SPC Floor Sheet Machine, Output & Factory Setup
Short answer: an SPC flooring production line turns PVC resin and stone powder into rigid-core floor sheets. Qingdao Precision Machine's 92/188 SPC floor sheet machine makes sheets 980–1220 mm wide and 2–8 mm thick at 800–2000 kg/h, and the same line can also run imitation marble sheet.
980–1220 mmSheet width
2–8 mmSheet thickness
800–2000 kg/hCapacity
1 yearWarranty after installation
What Is an SPC Flooring Production Line?
SPC (Stone Plastic Composite) flooring has a rigid core made from high-quality stone powder and PVC resin. The core sheet is produced on an extrusion line, then decorated, cut and locked into planks. Because the core is stone powder based, the floor performs well in humid rooms and does not mildew in high humidity. If you are comparing suppliers, start with our SPC Floor Sheet Machine Complete Buyer's Guide 2026 and then use this article to size the line.
Machine Layout: What Is Inside the Line
A complete SPC floor sheet machine line from Qingdao Precision Machine is made of these units:
- Extruder – plasticizes the PVC and stone powder compound. See our parallel twin screw extruder and the single vs twin screw guide.
- Mould – forms the melt into a flat sheet.
- Four-roll or six-roll molding machine – calenders the sheet to final thickness and surface.
- Cooling system and hauling-off machine – fixes the dimension and pulls the sheet at a stable speed.
- Automatic length-set cutting machine and finished-product unloading table – cut sheets are stacked without manual handling.
Upstream, a high-speed mixer prepares the compound; our single pot mixer is a common match.
Key Specifications of the 92/188 SPC Floor Sheet Machine
| Product item | SPC flooring sheet machine |
|---|---|
| Model | 92/188 |
| Sheet width | 980–1220 mm |
| Sheet thickness | 2–8 mm |
| Capacity | 800–2000 kg/h |
| Roll configuration | Four-roll or six-roll molding |
| Other products | SPC floor and imitation marble sheet |
| Warranty | 1 year from successful installation and test in your factory |
Why Factories Choose SPC Flooring
| Waterproof and damp-proof | Stone powder core performs well with water; no mildew in high humidity. |
|---|---|
| Fire retardant | NFPA Class B; flame goes out automatically within 5 seconds and no toxic gas is produced. |
| No formaldehyde, no lead salt | PVC resin and stone powder with a calcium-zinc stabilizer; no benzene, formaldehyde or heavy metal. |
| Dimensional stability | After 6 hours at 80 °C: shrinkage ≤ 0.1 %, curling ≤ 0.2 mm. |
| Wear resistance | Transparent wear layer rated above 10,000 revolutions; high friction even when wet. |
| Subfloor tolerance | Rigid core hides many subfloor imperfections compared with traditional LVT. |
How to Size Your SPC Floor Line: 5-Point Checklist
- Target width and thickness – confirm the 980–1220 mm and 2–8 mm window covers your plank formats.
- Daily output – convert planned square metres per day to kg/h, then pick a point inside the 800–2000 kg/h range.
- Calender type – ask for four-roll or six-roll depending on surface and lamination plan.
- Product mix – if you also plan marble sheet, see our PVC marble sheet machine; for flexible tile see the LVT flooring machine.
- Downstream finishing – UV coating and lamination equipment: UV painting machine and laminating machine.
Our engineers help test the machine in your factory, spare parts are free during the warranty period and installation support is included. More answers are collected in the SPC floor sheet F.A.Q.
Frequently Asked Questions
What is the capacity of the 92/188 SPC floor sheet machine?
The 92/188 SPC floor sheet machine produces sheets 980–1220 mm wide and 2–8 mm thick at a capacity of 800–2000 kg/h.
Can the same SPC line make imitation marble sheet?
Yes. The SPC stone plastic floor line can produce both SPC floor sheet and imitation marble sheet.
What are the main units of an SPC flooring production line?
An extruder, mould, four-roll or six-roll molding machine, cooling system, hauling-off machine, automatic length-set cutting machine and an automatic finished-product unloading table.
What warranty comes with the machine?
One year from successful installation and testing in your factory, with free spare parts and engineer support for commissioning.
Get Your SPC Flooring Production Line Quote
Tell us your target width, thickness and daily output. We will reply with a complete line proposal and factory price within 24 hours.
Request Free Quote →WhatsApp +86-15966835076 · sales@plastmachine.cn
