News

PVC WPC celuka foam board machine: 1220–2050mm wide, 2–50mm thick, 400–800kg/h, twin-screw extruder. For cabinet, signage & building boards. Free quote.

SPC floor sheet machine 92/188: 980–1220mm wide, 2–8mm thick, 800–2000kg/h. Four/six-roll line for SPC floor & marble sheet. 1-year warranty. Free quote.

The PVC fiber reinforced hose machine — also called PVC yarn reinforced hose or snake hose production line — is one of the most commercially versatile extrusion lines in the flexible hose industry

A PE layflat hose machine produces one of the most widely used irrigation and water delivery products in global agriculture and construction. Lightweight, strong, cold-weather flexible, and fully recyclable — PE layflat hose is rapidly replacing PVC in demanding markets worldwide. This guide explains the machine, the product, its performance advantages over PVC, and everything you need to evaluate

Choosing between a single screw extruder and a twin screw extruder is the most fundamental engineering decision in any plastics extrusion project. This article provides the definitive comparison and a simple decision framework.

Two of the highest-demand product lines globally — XPS foam board for building insulation and HDPE geomembrane for waterproofing — serve massive, growing infrastructure markets. Both are produced on lines from Qingdao Precision Machine.

WPC (Wood-Plastic Composite) profile extrusion machines produce the fastest-growing category of outdoor and indoor building products globally. Qingdao Precision Machine supplies the full range — from single-layer outdoor decking machines to co-extrusion lines with UV-stable ASA cap layers.

Plastic pipe extrusion machines are among the highest-volume categories of plastic processing equipment. Whether you need PVC water supply pipes, HDPE gas lines, PPR hot-water plumbing, or double-wall corrugated drainage conduit — this guide covers every major pipe type and technical specifications.