The drying requirements of the layflat hoseThe drying requirements of the layflat hose
After the water hose is applied, it needs to be cleaned and dried, so as to ensure the good effect of storage and application of the hose in the later stage. There are still some requirements to be met regarding the drying of the hose.
It is reported that most of the hoses currently in use are rubber-lined hoses. When drying, they can neither be exposed to the heat nor hung in the cold. High temperature exposure can cause the rubber skin in the hose to oxidize and detach. When it is hung to dry in severe cold, the rubber skin in the hose will harden and easily break. It is necessary to master the drying time of the hose. Generally, when the hose is touched by hand, the surface layer is soft and non-wet, and it can be put into the warehouse or put into use. The quality and service life of the hose can be guaranteed by properly drying the hose. Therefore, the above-mentioned requirements for hose drying must be understood and followed.
If the micro-spray belt has been used once, it must be replaced or sent to the fire service unit for maintenance. The high-quality hose only needs to be inspected once a year, because the hose needs to withstand a lot of pressure during use, so Over time, the inner wall of the hose will have problems such as adhesion. If it is not maintained, the hose will burst during use, which will affect its use.