What are you afraid of 1. Fear of freezing. All plastic tubes are afraid of freezing. If the tube freezes and melts again, the expansion force specifies that all plastic tubes burst, and aluminum-plastic tubes are no exception. 2. Fear of folding. All plastic pipes are afraid of bending at large angles, because it is aluminum plastic, so it is generally no problem to bend 90 degrees, but the
The main purpose of aluminum-plastic pipe Netcom hot water pipe One: Six leading advantages of aluminum-plastic hot water pipes 1: 80 degrees high temperature without deformation (no deformation) 2: one-time molding without delamination (without delamination) 3: 80 degrees high temperature can be used for a long time (high temperature resistance) 4:100 Kg pressure does not break (high pres
Knowledge about aluminum-plastic pipes, uses of aluminum-plastic pipes Now, the aluminum-plastic pipe product is already common in our daily life, and the aluminum-plastic pipe joint is inseparable from the aluminum-plastic pipe, so it is also necessary for us to learn more about the common knowledge and information about the aluminum-plastic pipe joint. The aluminum-plastic pipe joint will
Where is the aluminum-plastic pipe used? Aluminum-plastic pipe is a non-toxic, non-odorous plastic water pipe, which has good impact resistance, corrosion resistance and weather resistance. However, some users are not clear about its purpose. So, where is the aluminum-plastic pipe used? What are the uses of aluminum-plastic pipes? Let's take a look at the specific use of this pipe together wi
Do you know the purpose of aluminum-plastic pipes? Characteristics of aluminum-plastic pipe The aluminum-plastic composite pipe is formed by co-extrusion of the outer layer of PE, the middle longitudinally welded aluminum pipe, the inner layer of PE, and the hot-melt adhesive between the inner and outer layers of PE and the aluminum pipe. Its characteristics are as follows: (1) Good corro
Aluminum plastic tube Aluminum plastic tube (English name: Aluminum Plastic Tube) is a new type of pipe composed of longitudinally welded aluminum tube, inner and outer layers of polyethylene plastic and hot melt adhesive between layers. Polyethylene is a non-toxic, odorless plastic with good impact resistance, corrosion resistance and weather resistance. The longitudinally welded aluminum allo
For traditional inferior PVC seals, you need to understand PVC is polyvinyl chloride, a plastic product synthesized from 43% oil and 57% salt. Compared with other types of plastic products, PVC uses raw materials more effectively and reduces fuel consumption. At the same time, the energy consumption of PVC manufacturing is also very low. And in the later period of use of PVC products, it can be
In the automotive sealing strip industry, most of the sealing strip products are mainly soft PVC (hardness range is HA50-HA85). Since the glass transition temperature of PVC resin is about 75°C, it is particularly sensitive to temperature changes, and it is very brittle when the temperature is low. Therefore, for automotive PVC seal manufacturers, it is imperative to improve the cold resistance of
