What is the production standard of aluminum plastic pipeWhat is the production standard of aluminum plastic pipe
1 Plastic layer and aluminum layer are connected tightly
When the aluminum-plastic pipe is produced, the plastic layer and the aluminum layer should be tightly connected. When producing aluminum-plastic pipes, pay attention to the dense connection between the plastic layer and the aluminum layer. When the glue sticks, use glue with sufficient viscosity to make the connection between the two more firm and dense. In this way, the high temperature resistance of the pipe will be strengthened and the service life Will be more durable.
2 Uniform wall thickness
When producing aluminum-plastic pipe, the wall thickness of the pipe also needs attention. The wall thickness of the pipe should not be high on one side and low on the other side, which will affect the connection and installation of the pipe, and it will also cause problems during use. It is necessary to supervise the wall thickness of the produced pipes to make the produced pipes uniform in wall thickness, more durable and resistant to high pressure.
3The appearance is flawless
When producing aluminum-plastic pipes, pay attention to the environment when producing pipes. The surrounding environment must be clean and sanitary, and the inspection must be timely. The water quality in the cooling tank must be clean and free of dirt, particles, debris, etc., otherwise it will contaminate the pipe and affect the beauty of the pipe. The qualified aluminum-plastic tube should be flawless in appearance.
4 length up to standard
When producing aluminum-plastic pipes, the length of the produced aluminum-plastic pipes must also meet the standard. The aluminum-plastic pipe with the length up to the standard will be more convenient for users to install. Hydraulic engineers can also be more accurate when calculating the amount. For the manufacturer, the length of the aluminum-plastic pipe produced is up to the standard, which is convenient for installation and transportation.
5-caliber up to standard
When producing aluminum-plastic pipes, not only the length and wall thickness of the pipe, but also the caliber must be paid attention to. The diameter of the pipe determines the applicable scene of the pipe, and different diameter pipes use different positions. The caliber of the produced pipe must also meet the standard, so that the pipe can be used in the correct position without quality problems.
If you want to know more about it please do not hesitate to contact me. WhatsApp:+86-15966835076.