Problems that should be paid attention to in the production of plastic sealing strip equipmentProblems that should be paid attention to in the production of plastic sealing strip equipment
For the production method of plastic seals, according to the production process, usually granulate first, and then use a plastic extruder to extrude the plastic particles into the products we need, so that the finished seals can be obtained.
In the manufacturing process, we must pay attention to the temperature of each plasticizing section of the screw and screw of the plastic extruder. The physical properties of plastic products extruded at different temperatures are very different, and sometimes the products we extrude are not optimal. We need to extrude plastic pellets in different ways according to different materials and different recipes. We know that the quality of plastic sealing strips can be directly controlled by plastic particles, which means that the quality of plastic particles can directly affect the quality of plastic sealing strips. Therefore, we should adjust the product quality of the required sealing strip when selecting the plastic ratio formula. Mainly adjust the cost of the plastic formula according to the price of the plastic seal. Therefore, when we are manufacturing, we must carry out the manufacturing of the relationship between good quality and cost. Another is that when manufacturing the sealing strip, we need to choose the type of plastic extruder according to the size of the sealing strip, and use the appropriate plastic extruder to stably produce the sealing strip we need.