Winter maintenance method of micro spray belt When using the micro-spray belt in winter, avoid sharp objects to prevent the plastic-coated hose from being punctured. The back and forth vehicles crushed the hose. The weather is relatively cold in winter to prevent the micro-spray belt from freezing and cracking. The water inside should be emptied in time after use to prevent the water from freez
Precautions for bending the hose In the hose application, its equipment is greatly affected by its adaptability and safety. The realization of the performance of the product depends on the guarantee and use of the standardized operation process and items, especially the hose under bending use. It is particularly worth noting that it should be used under conditions above a small turning radius.
How to use water hose When using the hose, first check whether the hose, water gun and connector are intact. If they are damaged, they cannot be used. When laying the hose, pay attention to avoid contact with sharp objects and oily items during laying, and be sure not to bend the fire hose, and insert the connecting buckle into the chute accurately when connecting the hose, and press smoothly
What to do if the hose is blocked The water belt is blocked by the following two methods. One is to use the pressure dredging method, which is to use a certain specification of compressed air or pressure water to flush the drip irrigation system. This has a good effect on dredging the clogging of organic matter, but this method is effective. Carbonate blockage is ineffective. If it is carbona
How to choose a hose with good quality and good price First of all, when choosing, the first thing you need to pay attention to is the appearance of the product. In general, a good quality hose is woven from high-strength polyester filaments with a relatively high density. Secondly, you need to pay attention to the lining of the hose. What is it like, we can say that the lining of the hose wi
The drying requirements of the hose After the water hose is applied, it needs to be cleaned and dried, so as to ensure the good effect of storage and application of the hose in the later stage. There are still some requirements to be met regarding the drying of the hose. It is reported that most of the hoses currently in use are rubber-lined hoses. When drying, they can neither be exposed to t
What are the requirements for installing a hose connector The hose produced by the hose manufacturer has attracted people's attention. Its use has increased people's income and saved time. So what requirements and matters should people pay attention to when installing the connector? First of all, when connecting the threaded rotary joint, pay attention to whether the thread direction of th
Advantages and performance of PE hose PE hose is an important equipment for water-saving irrigation that is popular and advocated nowadays. Standard, reinforced, woven irrigation hoses, etc. are all outstanding representatives among them. They are rich in variety, highly targeted, and widely applicable. In actual use, it has the following product advantages and performance. The UV material
