How to prevent PE PVC hose from being crushedHow to prevent PE PVC hose from being crushed
PVC PE hose is mainly used for farmland irrigation, so the hose will inevitably be crushed. The following editor will explain how to prevent this.
First, when laying the hose, you should carefully select the appropriate hose size connector, install and place the hose, and then bypass the end of the hose to avoid rolling of the hose due to more vehicles on the road, thereby shortening the hose Service life. Secondly, we can also create a good environment for placing agricultural hoses. For example, dig a deep enough channel to place the hose on the ground, put the hose in the middle, and then spread the straw, which can effectively prevent the hose from being damaged. Crushed. Under normal circumstances, the hose needs to be cleaned after use, especially for the hose conveying foam, it must be washed carefully to better protect the glue layer of the hose. In order to remove the grease on the hose, you can use warm water or soap to wash it; for the frozen hose, you need to melt it first, and then wash and dry. The hose that is not dried should not be rolled up and stored.
In addition, when laying the hose, try to plan a short and flat route, which can reduce the use of the hose, which reduces the area under rolling to a certain extent, thereby effectively extending the service life of the hose.