How to effectively avoid damage to agricultural water beltsHow to effectively avoid damage to agricultural water belts?
The hoses of micro-spray belt manufacturers will be damaged after long-term use. How can we effectively avoid damage to agricultural hoses? What are some good methods?
When the hose of the hose is placed on the interface, it must be covered with a layer of soft protection, and then fastened with a galvanized iron wire or hose clamp; to prevent the direct effect of flame and radiant heat, pay special attention to not let the hose contact high-temperature objects; pay attention to the hose Do not contact with corrosive chemicals such as oils, acids, alkalis; when laying the hose, avoid sharp objects and various oils, and when laying the hose vertically to a high place, use the hose hook. When laying water belts through traffic arteries, water belts should be used to protect bridges. When passing the railway, the hose should pass under the track to prevent the hose from being crushed by wheels and intermittent water supply.
When the hose is in contact with moisture, the storage operation will preserve the water in the hose. There is also a pungent smell, the remaining water drops evaporate with the sun, and it is easy to use paint for a long time in the water pipe. The pressure of the coated hose should be higher than 0.6mpa, the surface should be smooth and flat, and the wire should not be broken. Distortion, distortion, internal and external gaps, pores and other defects, impurities in the coating clamp. The hose material is made of 20 cylindrical chemical fiber polyester threads, the thickness must be greater than 1.5 mm, and small deviations are not allowed.