Brief introduction of PE offshore pedal equipmentWith the development of industry and fisheries, water pollution has become more and more serious, and the density of aquaculture is also gradually increasing. There are fewer and fewer areas available for aquaculture. The breeding pedal has the advantages of low investment, high output, and maneuverability. It is one of the effective means to solve the above problems and has a wide application prospect. However, the design of the existing aquaculture fish pedals is unreasonable, some adopt solid structure, which increases the weight of the pedal, and puts forward higher requirements on the floating body; some adopts a hollow structure, which reduces the weight of the pedal, but will reduce the pedal The intensity of the impact on the normal operation of the staff.
The 300mm marine pedal production equipment is made of high-density polyethylene (HDPE, content ≥95%) as the main raw material, processed by extrusion process; it can be carried out with the assistance of other metal or plastic accessories according to actual needs or engineering design Connected, fixed, combined, and installed into various shapes, used for floating products on the water surface for dock, pontoon, platform, etc.
There is a hollow chamber in the pedal. The hollow chamber is divided into a plurality of independent chambers of different sizes by partitions according to the stress conditions of different parts of the pedal. Among them, the space corresponding to the independent chamber of the pedal is large. The space of the independent chamber corresponding to the part where the pedal force is small is large. The hollow chamber is provided along the length of the pedal and penetrates the entire pedal. A plurality of non-slip fixing grooves are evenly distributed on the upper surface of the pedal along the length direction. SJ75/33 single-screw extruder (extruded main profile), SJ50/33 single-screw extruder (square tube guardrail co-extrusion), die, vacuum setting platform, SJ50/33 single-screw extruder (non-slip extrusion surface) Layer), non-slip layer sheet extrusion die, hot air gun, calender, spray box, tractor, cutting machine, turning frame.
Ocean pedal production equipment is made of high-density polyethylene (HDPE) as the main raw material, and the corresponding antistatic agent, agent and anti-UV ultraviolet agent and other auxiliary materials are added in the production process. It has the characteristics of anti-corrosion, no erosion by seawater, no pollution, and no damage to the ecological environment; the product is formed once and seamlessly. This product is suitable for normal use in natural environments such as strong sunlight and fresh (sea) water immersion.
It is processed by extrusion process; it can be connected, fixed, combined and installed into various shapes with the assistance of other metal or plastic accessories according to actual needs or engineering design. It is used for water and land connection in docks, pontoons, platforms and other places Products floating on the water.
The marine pedal production equipment is a new type of environmentally friendly product. During the production process, the corresponding antistatic agents, agents and anti-UV ultraviolet ray agents and other auxiliary materials are added. The whole is formed at one time, seamless and without water seepage, which conforms to the American Society for Testing and Materials ASTM , European Union CE and China's GB9687-1988 national health standards; with, anti-corrosion, not subject to seawater erosion and pollution, does not damage the ecological environment and other characteristics; the product is formed at one time, seamless, this product is suitable for strong sunlight, light (sea ) Normal use in natural environments such as water immersion