How to use PET strapping

How to use PET strapping

PET packing belt, also known as plastic steel belt (PET packing belt, plastic steel packing belt), is made of polyethylene terephthalate (English abbreviated as PET) as the main raw material. PET packing belt is currently the most popular new environmentally friendly packaging material in the world replacing steel belt, steel wire and PP packing belt. PET packaging tape is more cost-effective than ordinary packaging tape, it is easy to use, and the advantages of environmental protection and safety are loved by more and more customers, and many people often encounter some problems during use. Here, Chongqing Wanda Packaging Here to remind you some simple packaging methods:

Tools/raw materials
PET strapping

A plastic strapping machine

If you are using a baler that requires a bale buckle, you need to prepare a number of PET bale buckles; if you are using a pneumatic buckle-free baler, you do not need a bale buckle.

Step/Method
1
Strap: Use the strap to wrap the package, hold the overlapped part with your left hand, leave the tail about 300mm, and gently pull out the remaining part with your right hand. Packing strap: Hold the handle and the tensioner in your right hand (to ensure the maximum expansion between the tension wheel and the hanging tooth of the pressure plate), and insert the upper and lower parts of the strap at the same time. Note: The overlapping part of the strap must be separated by the lower blade of the fixed cutter: Loosen the tensioner (the tightening wheel tightly clamps the strap).

2
Tighten the strap: Use your right thumb to press the tension switch lever (right side) switch until the strap is fully tightened.

3
Vibration and cutting: Use your right thumb to press and hold the vibration switch lever (red) until the strap is cut and welded. Note: Press and hold the vibration switch lever of the pneumatic baler until the vibration timer automatically stops.

4
Remove the strap: press the handle and the tensioner with your right hand, and press the reversing switch with your right thumb until the strap is loose from the tightening wheel. Squeeze the handle and tensioner to remove the tool from the strap.


Precautions
When using a pneumatic baler, be sure to pay attention to safety, and do not pass through the baler with your hands when playing.

If you want to know more about it please do not hesitate to contact me. WhatsApp:+86-15966835076.