How to connect MPP cable protection tube during constructionIn real life, the pipe is generally not used alone, and it is usually necessary to connect it to achieve its proper performance. MPP power protection tube is a related product that everyone is more familiar with. Let's talk about the main connection methods for this type of pipe.
1. Hot-melt connection of MPP power protection tube. Everyone should know that the MPP power tube is a tube with good high temperature adaptability, and it must be subjected to high temperature extrusion and plasticity during the production process, so the hot melt welding method can be used directly when connecting. Specific operation: hot-melt welding with a welding machine, the welding point is about 200 degrees, not more than 220 degrees, when the temperature reaches, you can butt at both ends. Here is an extension: when hot melt welding is used for MPP power pipes, the cable will be scratched if the welding port is not good, so the general manufacturers will choose new materials to produce MPP power pipes, even if they are connected Also pay attention to the cut of the gate.
2. The connection of MPP power protection tube. MPP excavated pipes and MPP directly buried pipes can be connected with joints, which can save construction cost and construction period. Generally, MPP power pipes are connected by suitable socket interfaces. This kind of pipe generally adopts a porous integrated structure with uniform stress, a small coefficient of friction on the inner wall of the product, and a wide temperature range for the product. It can be used in tropical and cold areas. The joint adopts a socket structure. The connection between pipes can be completed without related tools, which is convenient for construction and maintenance.
What are the main connection methods of MPP power protection tube? The above is summarized and will not be repeated later.