What are the matters needing attention for prestressed plastic corrugated pipe equipment?
What are the matters needing attention for prestressed plastic corrugated pipe equipment?The prestressed plastic corrugated pipe equipment is made of HDPE, which is a new type of hole forming material. Mainly used for post-tensioned pre-stressed cement structure, the tie rod has good hole tightness, no water leakage, high ring stiffness, small friction parameters, anti-aging, anti-electric corrosion, good elasticity, and not easy to be broken. And the new connection method makes the construction connection.
The production line of prestressed plastic corrugated pipes mainly uses polyvinyl chloride or vinyl chloride as the material to produce prestressed plastic corrugated pipes (special corrugated pipes for bridges). Due to its unique structure, the pipe has the advantages of light weight, good impact resistance, high ring stiffness, strong corrosion resistance, cold and heat resistance, and is widely used in power cable sheathing, urban drainage (feed) water, and agricultural irrigation , Buried infiltration irrigation and construction of upper and lower water delivery areas.
Tianxintai will take you to understand what are the matters needing attention in the prestressed plastic corrugated pipe equipment?
The full set of prestressed plastic corrugated pipe production line is mainly composed of extruder, extrusion die, forming machine, natural cooling equipment, auxiliary tractor, sawing machine, and reversing table. The forming machine mainly consists of a reduction box, upper and lower templates, transmission forming templates, racks, air-cooled equipment, and forward and backward moving equipment. Water-cooled and forced air-cooled, the template material is 40Cr after heat treatment and the surface hardness is HRC45-52. The frame is connected with good steel and the structure is reasonable and stable. The drive motor first uses a frequency converter, and then achieves uniform stepless speed regulation. The whole machine is automatically adjusted up and down, left and right, front and rear.
It is a complete set of production equipment and production line for prestressed plastic corrugated pipes. It is a new type of perforation material, which is widely used in the construction industry. When we operate the production line of prestressed plastic corrugated pipes, we need to pay attention to some precautions. The following will take you to understand the precautions for the use of prestressed plastic corrugated pipe equipment:
1. Feeding is prohibited during parking.
2. During operation, if there is an abnormal situation, please stop checking immediately.
3. The feed should not be overloaded, and the crushing process should be carried out evenly, and overloading will occur during the process. Feeding should be stopped immediately, and standby equipment should be restored to normal before feeding.
4. According to the nature of the damaged plastic, regularly check the sharpness of the fixed blade and the rotating blade. Usually, the new waste and lower corners are checked once in 6 shifts.
Remember to contact us if you need it! We welcome your inquiries and visits at any time!
If you want to know more about it please do not hesitate to
contact me. WhatsApp:+86-15966835076.
