The method and steps of laying PVC floorThe method and steps of laying PVC floor
There are many friends who want to simply decorate their home, the purpose is to meet the conditions of occupancy. So there are many ways to lay the ground. A relatively simple paving method is to lay the PVC floor on the ground. In fact, if we choose a piece of PVC floor, the effect after paving is still very good. It is not recommended that you choose PVC coils. So how to lay the PVC floor? Everyone masters the following content, we can install the PVC floor according to the steps when we buy it ourselves. The specific steps of laying and pasting PVC floors include the following contents. You can follow the steps below.
(1): Preparation before paving
We need to prepare the corresponding materials before laying the PVC floor. This is mainly for the laying of PVC sheet floors. If it is ordinary floor leather, there is no need to prepare these materials, just clean the ground. And if we lay PVC tile floors, we need to prepare the corresponding materials and tools.
①, material preparation. The materials we need to prepare include cement, and the focus here is to choose self-leveling cement with high fluidity. Then you need to prepare the plastic plate. The last step is to prepare the adhesive. The choice of adhesive should be selected according to the PVC plastic floor we choose.
②, the preparation of tools. For the paving of PVC plastic floors, the corresponding tools should be prepared. Here you need to prepare the welding machine for the plastic plate, and then prepare the corresponding gauge. In addition, you can also prepare large buckets, small buckets, steel rulers, spirit levels, rollers, brushes, wire brushes, etc. These are some of the tools we need to use when laying PVC plastic floors. When you buy, you can ask the manufacturer to provide us with corresponding tools, and of course, you can also ask the manufacturer to install it for us.
(2): Paving method
For the construction of PVC plastic floor, we can prepare for paving after preparing the corresponding materials and tools. For the specific operation steps of PVC floor paving, I personally recommend the following four steps. If you plan to lay PVC floors at home, you can also understand these steps clearly.
①, grassroots processing. The so-called treatment of the base layer is to treat the ground we need to lay the PVC plastic floor on according to the requirements. For example, you can use a chisel or a wire brush to clean the sand, dust, etc. on the base layer, and then clean the dust on the ground. It is recommended that you use a high-power vacuum cleaner to clean the ground again. Then we can use self-leveling cement to level the ground and then cure to its strength. The last point is to rinse with water, and do not allow any white ash, dust, etc.
②, elastic line. Elastic wire is a key to our control of plastic floor laying process standards. Everyone must pay attention to the elastic line between the plastic floor paving. When the line is stretched, the room is discharged from the installation and paving position of each piece of the plastic floor according to the size of the plastic floor. After that, the cross control line pops up on the ground, and there is the dividing line of the plastic floor. As usual, right-angle planks are used. But it is also possible to pop up 45-degree or 60-degree beveled plank lines. The specific elastic line depends on our paving effect.
③, brush primer. Primer is what we must do before laying vinyl floors. Before paving, I would like to remind everyone that the ground must be cleaned up. On the cleaned ground, we need to brush a uniform primer. The primer is all matched with the plastic floor. After the primer is painted, it is necessary to wait for the primer to dry. After that, we can lay the floor in order from the middle to the four directions along the axis according to the position of our previous elastic line. When paving, it is paving on the ground piece by piece.
④, lay plastic floor. Before laying the plastic floor, wipe the back of the plastic floor clean, usually dry it with a damp cloth. After that, we need to apply glue on the position where the plastic floor is laid and the back of the plastic floor. When brushing on the ground, it should exceed 10mm on each side of the dividing line, and the thickness of the coating should be less than 1mm. Then it can be used to paste the plastic floor. Accurately pave in place according to the elastic paving line at one time, and then paste it tightly. What needs to be reminded here is that the ground glue to be painted should be brushed with the paste, and large-scale painting is not allowed. In this way, the laying of the entire indoor plastic floor can be completed.
(3): Matters needing attention
The above briefly introduces the specific operation process and construction steps of indoor laying plastic floor. In this process, everyone should pay attention to related issues, which are the keys to ensure our paving effect and paving quality. Specifically includes the following content.
① When laying the plastic floor, it is recommended that you first lay a cross control panel in the middle of the room according to the crosshairs, and then follow the laid cross control panel to the surrounding areas. In the process of paving, the flatness should be checked at any time, so as to ensure the uniformity of the entire paving effect in our room.
② For the paving of the patterned plastic floor, the accurate dividing line must be popped up according to the requirements of the pattern, and the corresponding marks must be made. Before paving, it is recommended that you number each piece of plastic floor, and then pave according to the number and dividing line. This can achieve the best paving effect.
③ After the PVC floor is laid, if the board seam needs to be welded, everyone needs to pay attention that the welding should be carried out after 48 hours. Another method is to weld first and then pave. This is to ensure that the uniform performance of the gap of our plates is roughly the same as the performance of each plate to avoid differences.
Plastic floor is a relatively simple floor covering material. The wear resistance of the plastic floor is still good, and it gives people the feeling that it is very comfortable to sit on. Therefore, if we all have simple decoration in our homes, we can indeed choose to lay plastic floors on the ground, but the choice of plastic floors must pay attention to its environmental protection performance. Do not choose some outdoor types, otherwise it may cause the indoor smell all the time. There is no way. Check in. As for the construction of the plastic floor, what we focus on is the construction process of each step, and it is enough to follow the requirements of the construction process.