how to seal the edge of pvc wpc hollow door board?
The first is that the method of edge sealing of wood-plastic doors is the same as the principle of seaming of cabinets, but it is used less in paint-free doors. Among them, the door panels are hand-processed, and the quality depends mainly on the tightness of the 45-degree seam. The glue seam is narrow and uniform. The plastic board edge of the density board is the most commonly used edge-sealing form for paint-free doors. A plastic density strip is used as the edge seal, which is glued to both sides of the door. This edge seal is relatively thick, and the gap between the edge seal and the wooden door leaf is large and unattractive.MDF blister sealing is divided into flat edge sealing and dovetail groove edge sealing, flat edge sealing is that the contact surface between the edge sealing strip and the door panel is a flat surface, which is mostly glued by hand with universal adhesive, which is easy after a long time. Separation; the edge of the dovetail slot is shaped by the edge strip and the door panel, and the two are stuck together, which is relatively strong.