HDPE marine pedal production line configuration: 1.SJ90*33 single screw extruder 1 set 2.SJ45*33 single screw extruder 1 set 3. 2 vacuum drying feeders 4.1T spiral lifting mixed dryer 5. A set of molds (320mm/400mm) (the equipment includes a set of molds) 6. 1 set of HS-ZD10000 vacuum setting table 7. HS-LQ400 crawler traction and cutting 1 set 8. 2 sets of cooling brackets
The traditional offshore cage culture uses wooden cages, wooden fishing rows and plastic foam as the main means of production. It will cause serious pollution to the sea before and after production and breeding, and it has weak resistance to wind, waves and risks, and there are hidden safety risks. The shallow water in the net farms is easy to cause sedimentation, insufficient water circulation, a
PE marine pedal production line products are used as new and necessary products for marine aquaculture, marine leisure, and marine industry, which is a new star in the plastic products industry. The main material of PE marine pedal production line products is HDPE, also known as low-pressure polyethylene. It is a white granular product that can be recycled. It has good heat resistance, cold resist
1: The production base of marine pedals: it must be a coastal area. Because the shipping cost and the size of the production are considered, it must be as close as possible to the beach. Especially in some areas, it is directly invested in the seaside after the production is completed. 2: Application of marine pedals/fish steaks: mainly used in deep sea and shallow sea farming, such as some yello
With the development of industry and fisheries, water pollution has become more and more serious, and the density of aquaculture is also gradually increasing. There are fewer and fewer areas available for aquaculture. The breeding pedal has the advantages of low investment, high output, and maneuverability. It is one of the effective means to solve the above problems and has a wide application pro
How to properly clean and change the color and material of plastic extruder Using fire or roasting to remove the plastic fixed on the screw is a common and effective method for plastic processing units, but acetylene flame cannot be used to clean the screw. The temperature of the acetylene flame can reach 3000°C. Cleaning the screw with acetylene flame will not only destroy the metal characte
Read the future international trend of my country's plastic extruder In my country's plastic machinery market, plastic extruders, as an important processing equipment, play a decisive role in the processing of products such as packing belts, plates, sheets, films, pellets, and profiles. The development of extruder processing technology has always been the focus and hotspot of the development
1. Easy assembly and disassembly It is easy and fast to operate with a snap connection; the surface of the template is smooth and clean, it is automatically demoulded, no cleaning and maintenance, and no mold release agent is needed. The surface of the template after use is not sticky with cement, and the template does not need to be cleaned; under the same workload, the construction efficiency
