HDPE winding pipe clamp connection operation method A. 1. Connection of pipeline and inspection well: The connection between the pipeline and the wall of the inspection well shall meet the design requirements. If there is no specific design requirement, the following methods may be adopted: (1) When the HDPE winding pipe has been laid in place, it is advisable to use cast-in-situ concrete to
PE steel tape winding pipe we should know As the name suggests, it is to add a steel band to the plastic tube. The steel belt reinforced spiral corrugated pipe for underground drainage is made of high-density polyethylene (PE) as the matrix, and the steel belt coated with adhesive resin is formed into a corrugated shape as the main support structure, and is twined with polyethylene material to fo
What is the current situation of China's PE winding pipe market? According to what I know, PE winding pipe with polyethylene winding structure has the characteristics of light weight, low roughness of the inner wall of the pipe, and large water transfer volume with the same pipe diameter. The replacement products of cement substitutes have been widely used abroad. Over the past few years, they hav
PE steel belt reinforced spiral bellows, polyethylene steel belt reinforced bellows advantages and construction specifications PE steel belt reinforced spiral corrugated pipe construction steps: slotting-down pipe-connection-backfill 1. Slotting of steel belt reinforced polyethylene spiral corrugated pipes 1. The pipeline should be laid on the original ground or the compacted ground after
Precautions for installation and construction of PE hollow winding pipe 1. The pipe mouth should be aligned, and the pipe connection process should be careful, and avoid contamination of the interface. It is not allowed to move the pipeline within 30 minutes after the pipeline is connected. 2. The heating time of the pipeline and shrinkage belt should be moderate, otherwise the connecti
Talking about the difference between hdpe spiral reinforced tube and hollow wall spiral tube 1. Carat tube (HDPE winding B tube) 1. What is carat? Carat tube (HDPE winding reinforced tube) is hdpe (high density polyethylene) structure wall hot state winding tube, HDPE winding structure wall tube, it is a new type of special-shaped structure wall pipe material, which is made by high dens
Polyethylene (PE) winding structure wall tube is made of high-density polyethylene (HDPE) as raw material, adding 1.5-2% color masterbatch, through two single screw extruders (one is machine square tube, one is Extruded PE adhesive) extruded onto the inner mold, wound the square tube onto the inner mold (the inner mold is rotating), polyethylene (PE) wound structural wall tube between two square t
The implementation standard is: "Underground Polyethylene (PE) Structure Wall Pipeline System" Part 2: "Polyethylene Wrapped Structure Wall Pipe" (GB / T19472.2-2004). HDPE hollow wall winding pipe is a kind of structural wall pipe made of high-density polyethylene (HDPE) as a raw material and adopting hot winding forming process, which complies with the national standard "Underground Polyethylen
